How to Clean a 10 Cup Bunn Coffee Maker
If you own a 10 Cup Bunn Coffee Maker, you know that it produces great tasting coffee. To keep it running at peak performance, however, you’ll need to clean it from time to time. Following is a step by step guide on how to clean a 10 Cup Bunn Coffee Maker.
1. Disassemble the Machine
Begin by unplugging the machine and emptying the water reservoir. Then you will need to disassemble the machine. Remove the carafe, the brew funnel and the spray head.
2. Clean the Parts
Fill the sink with warm, soapy water and add the carafe, spray head and brew funnel to the water. Leave these to soak for a few minutes, then scrub them with a sponge or brush. Once all residue has been removed, rinse with clean water and allow to dry.
3. Sanitize the Parts
To sanitize the parts, fill a sink with one gallon of hot water. Add one teaspoon of bleach and mix thoroughly. Submerge the carafe, spray head and brew funnel in the solution for two minutes. Rinse with clean water and allow to dry.
4. Reassemble the Machine
When all the parts have dried, reassemble the machine. Plug the machine back in, fill the reservoir with fresh water, and you’re ready to make a fresh pot of coffee.
5. Perform Regular Maintenance
Your 10 Cup Bunn Coffee Maker should be cleaned and sanitized at least once every three months. Additionally, you should perform regular maintenance, such as descaling, to ensure that your machine remains in peak condition.
Tips for Cleaning a 10 Cup Bunn Coffee Maker
-
- Clean the parts separately – Clean the carafe, spray head and brew funnel separately, and make sure to rinse them thoroughly before reassembling the machine.
-
- Never mix bleach and vinegar – Mixing bleach and vinegar can produce dangerous chlorine gas, so it’s important that you never mix these two substances.
-
- Be careful with the brew funnel – The brew funnel is delicate and prone to breakage, so handle it with extra care.
-
- Use distilled water – Distilled water will provide the best tasting coffee, so be sure to use it when filling the water reservoir.
